Bori impregnace s biocidem W
Code: BL806K AAA1205 Choose variantProduct detailed description
Where it is used
Exterior and interior — for wooden elements exposed to weather conditions or moisture.
What it is applied to
Wood.
What it is for
Protects wooden surfaces against blue stain, mould, wood-decaying fungus and insects.
Bori Impregnation with Biocide W
Used for basic protection of wooden elements exposed to weather conditions outdoors or moisture indoors.
- 6–7 m²/lcoverage
- 1–3 layersnumber of layers
- 2 hrsdry to touch
Bori Impregnation with Biocide W
Used for basic protection of wooden elements exposed to weather conditions outdoors or moisture indoors. The impregnation protects wooden surfaces against blue stain, mould, wood-decaying fungus and insects.
- solvent-based protection against wood blue stain, mould, wood-decaying fungus and pests
- good penetration
- colourless
- easy to apply
Application
- Surface preparationThe surface should be clean, degreased, sanded, and damaged coatings removed. The recommended wood moisture is 15% for coniferous trees and 12% for deciduous trees. Wood moisture must not exceed 20%. Sand and clean the dry substrate, then remove waxes, resins and grease with NITRO thinner.
- ApplicationMix before use and apply in 1 layer. Take a sufficient, even amount onto the brush or roller and spread thoroughly into an even layer.
- ConditionsThe ambient and surface temperature should be between +10 and +25 °C. Relative humidity should be below 65%. Low temperature and high humidity can significantly affect drying.
- CleaningAfter finishing painting, remove as much impregnation from the tools as possible, then clean the used accessories and tools with thinner (ideally TESSAROL).
Key information at a glance
- 2 hrs/ 8–12 hrs/ 24 hrsDrying time dust-free/ touch-dry/ next coat
- With thinnerTool cleaning
- 6–7 m²/lCoverage
- Brush, roller, dippingApplication method
- ColourlessShade
- 1–3 layersNumber of layers
- 2 hrsDry to touch
The technical data sheet and safety data sheet can be found in the related files. To ensure correct application and obtain all the necessary product information, we recommend that you familiarise yourself with these documents. More information about safety during transport, storage, handling, as well as disposal and environmental aspects can be found in the safety data sheet.
Need advice?
Our friendly customer support is here for you. Write to us at: podpora@surtep.cz.
Free returns
Send the order back to us free of charge.
Fast dispatch
We dispatch orders within 24 hours on working days.
Additional parameters
| Category: | Impregnace a čističe |
|---|---|
| EAN: | Choose variant |
Discussion
Be the first who will post an article to this item!