Xyladecor Natur Pro
Code: AAAPC11070640 AAAPC11070632 AAAPC11070646 AAAPC11070638 AAAPC11070642 AAAPC11070634 AAAPC11070643 AAAPC11070635 AAAPC11070644 AAAPC11070636 AAAPC11070645 AAAPC11070637 AAAPC11070647 AAAPC11070639 AAAPC11070641 AAAPC11070633 Choose variantProduct detailed description
Where to use it
Interior and exterior — house cladding, cottages, gazebos, pergolas, fences, balconies, windows, doors.
What it is applied to
Wooden surfaces.
What its purpose is
Protects against UV radiation, frost and bad weather, highlights the wood grain, resistant to cleaning agents.
Xyladecor Natur Pro
Xyladecor NATUR PRO is a premium water-based medium-coat oil glaze for use indoors and outdoors.
- Up to 14 m²/lcoverage · in one coat
- Satin mattappearance
- approx. 1 hourdry to the touch
Xyladecor Natur PRO
Xyladecor NATUR PRO is a premium water-based medium-coat oil glaze for use indoors and outdoors. It creates a strong, elegantly semi-matt satin film on the wood surface that protects against UV radiation and bad weather. Fast-drying. The coating is resistant to common household cleaning agents.
The creamy consistency of the product makes application easier, spreads more smoothly and penetrates better into the wood. Increases adhesion for the next coat. Highlights the wood grain and is odourless.
It is intended for all wooden surfaces, such as house cladding, cottages, gazebos, pergolas, fences, balconies, windows, doors and other wooden surfaces, both outdoors and indoors.
- Up to 6 years of protection
- Fast-drying
- Protects against frost, UV radiation and bad weather
- Highly elastic film
- Natural oils from renewable sources
- Suitable for indoor and outdoor use
- Water resistance – increased water repellency
Application
- Surface preparationFor exterior coatings, it is recommended to impregnate the substrate with Xyladecor Xylamon HP fungicidal primer. Apply Xyladecor Natur PRO to a dry and clean surface. Remove any old coatings. Mix the contents thoroughly before use. Do not dilute.
- ApplicationApply Xyladecor Natur PRO with a brush in the direction of the grain. Carry out the coating in stable, dry weather. Apply 1–2 coats indoors. For long-term protection outdoors, apply 2–3 coats. The interval between applying individual coats is 4–8 hours. Dry to the touch after approx. 1 hour, fully dry after 12 hours. Lightly sand the coating before applying the next layer. Apply Xyladecor Natur PRO in stable, dry weather at temperatures of 5–30 °C and relative humidity below 85 %.
- ConditionsAmbient temperature and temperature of +20 °C and relative humidity of 50 %. Low temperature and high humidity can significantly affect drying.
- CleaningAfter finishing painting, remove as much paint as possible from the tools, then wash them with clean water.
Key information at a glance
- 1 hr/ 4 hrs/ 12 hrsDrying time touch/ next coat/ full
- With waterTool cleaning
- Up to 14 m²/lCoverage · in one coat
- BrushApplication
- Satin mattAppearance
- 1–2 coats indoors 2–3 coats outdoorsNumber of coats
- approx. 1 hourDry to the touch
The technical data sheet and safety data sheet can be found in the related files. To ensure correct application and obtain all the necessary information about the product, we recommend familiarising yourself with these documents. More detailed information on safety during transport, storage, handling, as well as disposal and environmental aspects can be found in the safety data sheet.
Need advice?
Our friendly customer support is here for you. Email us at: podpora@surtep.cz.
Free returns
Send your order back to us free of charge.
Fast dispatch
We dispatch orders within 24 hours on working days.
Additional parameters
| Category: | Lazury |
|---|---|
| EAN: | 8590627984781 |
Discussion
Be the first who will post an article to this item!
| Manufacturing company : | AkzoNobel Coatings CZ, a.s. |
|---|---|
| Address : | Vyskočilova 1481/4 Praha 4 – Michle 140 00 Česká republika |
| E-mail : | infolinka@akzonobel.com |