Bori Vodouředitelná Lazura
Code: AAA1207K AAA1207 AAA1211K AAA1211 AAA1209K AAA1209 AAA1208K AAA1208 AAA1206K AAA1206 AAA1210K AAA1210 AAA1212K AAA1212 AAA1213K AAA1213 AAA1217K AAA1217 Choose variantProduct detailed description
Where to use it
Interior and exterior — wooden facades, fences, pergolas, garden furniture, wood panelling.
What it is applied to
Wood — new and old surfaces after proper preparation.
What is its purpose
It protects wood against moisture, UV radiation and mould, and enhances its natural beauty.
Bori Water-Based Stain
Bori Water-Based Stain is a high-quality coating designed to protect and decorate wooden surfaces indoors and outdoors.
- 14–16 m²/lCoverage
- 1–2 coatsNumber of coats
- NaturalAppearance

Bori Stain
Bori Water-Based Stain is a high-quality coating designed to protect and decorate wooden surfaces indoors and outdoors. This stain is water-based, which ensures easy application and environmental friendliness.
It is suitable for both indoor and outdoor use, whether on wooden facades, fences, pergolas, garden furniture, or interior wood panelling.
- Water-based formula: Easy application and cleaning of tools with water. Dilute with 10% water.
- Wood protection: Protects wood against moisture, UV radiation and mould.
- Decorative effect: Enhances the natural beauty of wood, available in a wide range of colour shades.
- Environmental friendliness: Low content of volatile organic compounds (VOC), with no unpleasant smell.
- Long lifespan: Ensures long-term protection and colour stability.
Use
- Surface preparationThe surface should be clean, degreased, sanded, and any damaged coatings and impurities removed. Old coatings must be removed or sanded well. For new wood, the moisture content must not exceed 15% for conifers and 12% for hardwoods. We sand and clean the dry substrate, then remove waxes, resins and greases with NITRO thinner. To restore old coatings, we clean and sand undamaged coatings and completely remove damaged ones.
- ApplicationMix the contents thoroughly before use. You can dilute with 10% water. Apply with a brush, roller or by spraying in 1-2 coats along the wood grain (always after 3-4 hours).
- ConditionsThe ambient and surface temperature should be between +10 and +25 °C. The relative humidity should be below 65%. Low temperature and high humidity can significantly affect drying.
- CleaningAfter finishing painting, remove as much paint as possible from the tools, then wash them with clean water; dried paint should be removed with NITRO thinner or another common thinner.
Key information at a glance
- 30 min/ 1 hour/ 3–4 hoursDrying time to dust-free/ touch-dry/ next coat
- With waterTool cleaning
- 14–16 m²/lCoverage
- Brush, roller, sprayingApplication method
- NaturalAppearance
- 1–2 coatsNumber of coats
- 30 minTouch-dry
- 10–25 °CTemperature during application
- up to 65%Air humidity
- ExteriorArea of use
How much will I need?
Coverage 14–16 m²/l per coat. For absorbent or rough substrates, count on the higher value.
| Area | 1 coat | 2 coats |
|---|---|---|
| 10 m² | 0.6–0.8 l | 1.3–1.5 l |
| 25 m² | 1.6–1.8 l | 3.1–3.6 l |
| 50 m² | 3.1–3.6 l | 6.3–7.2 l |
When to paint
You can find the technical data sheet and safety data sheet in the related files. To ensure correct application and obtain all the necessary product information, we recommend that you familiarise yourself with these documents. More detailed information on safety during transport, storage, handling, as well as disposal and environmental aspects, can be found in the safety data sheet.
Need advice?
Our friendly customer support is here for you. Write to us at the email: podpora@surtep.cz.
Free returns
Send the order back to us free of charge.
Fast dispatch
We dispatch orders within 24 hours on working days.
Additional parameters
| Category: | Tenkovrstvé |
|---|---|
| EAN: | 3838847030037 |
Discussion
Be the first who will post an article to this item!
