Bori impregnace s biocidem W

Code: BL806K AAA1205 Choose variant
Not rated
€36,77 / pcs €13,02 / pcs from €13,02 / pcs €30,39 excl. VAT €10,76 excl. VAT from €10,76 excl. VAT Measure price:
Skladem (4 pcs) Skladem (1 pcs) Choose variant
Chosen variant is not available. Reset selected parameters.
Delivery to:
24.11.2026 24.11.2026 Choose variant
Delivery options

Basic protection for wooden elements exposed to weather conditions outdoors or moisture indoors. Protects wooden surfaces against blue stain, mould, wood-decaying fungus and insects.

Detailed information

Product detailed description

  • Where to use it

    Exterior and interior — for wooden elements exposed to weather conditions or moisture.

  • What it is applied to

    Wood.

  • What its purpose is

    Protects wooden surfaces against blue stain, mould, wood-decaying fungus and insects.

Bori impregnation with biocide W

Used for the basic protection of wooden elements that are exposed to weather conditions outdoors or to moisture indoors.

  • 6–7 m²/lcoverage
  • 1–3 coatsnumber of coats
Bori impregnation with biocide W

Bori impregnation with biocide W

Used for the basic protection of wooden elements that are exposed to weather conditions outdoors or to moisture indoors. The impregnation protects wooden surfaces against blue stain, mould, wood-decaying fungus and insects.

  • solvent-based protection against wood blue stain, mould, wood-decaying fungus and pests
  • good penetration
  • colourless
  • easy to apply

Use

  1. Surface preparationThe surface should be clean, degreased, sanded, and any damaged coatings removed. The recommended wood moisture content is 15% for softwoods and 12% for hardwoods. Moisture in the wood must not exceed 20%. Sand and clean the dry surface, then remove waxes, resins and grease with NITRO thinner.
  2. ApplicationMix before use and apply in 1 coat. Pick up a sufficient, even amount on a brush or roller and spread it thoroughly into an even layer.
  3. ConditionsThe ambient and surface temperature should be between +10 and +25 °C. Relative humidity should be below 65%. Low temperature and high humidity can significantly affect drying.
  4. CleaningAfter finishing painting, remove as much impregnation as possible from the tools, then clean the used accessories and tools with thinner (ideally TESSAROL).

Key information at a glance

  • 2 hrs/ 8–12 hrs/ 24 hrsDrying time to dust/ to touch/ next coat
  • With thinnerTool cleaning
  • 6–7 m²/lCoverage
  • Brush, roller, dippingApplication method
  • ColourlessShade
  • 1–3 coatsNumber of coats
  • 2 hrsDry to the touch
  • 10–25 °CTemperature during application
  • up to 65%Air humidity
  • ExteriorArea of use

How much will I need?

Coverage 6–7 m²/l per coat. For absorbent or rough surfaces, count on the higher value.

Area1 coat2 coats3 coats
10 m²1.4–1.7 l2.9–3.4 l4.3–5 l
25 m²3.6–4.2 l7.1–8.4 l10.7–12.5 l
50 m²7.1–8.4 l14.3–16.7 l21.4–25 l

When to apply

You can find the technical data sheet and safety data sheet in the related files. To ensure proper application and to get all the necessary information about the product, we recommend you familiarise yourself with these documents. More details on safety during transport, storage, handling, as well as disposal and ecology, can be found in the safety data sheet.

  • Need advice?

    Our friendly customer support is here for you. Email us at: podpora@surtep.cz.

  • Free returns

    Send your order back to us free of charge.

  • Fast dispatch

    We dispatch orders within 24 hours on working days.

Additional parameters

Category: Impregnace a čističe
EAN: 3838847137354

Discussion

Be the first who will post an article to this item!

Do not fill out this field

Security check

Vložením komentáře souhlasíte s podmínkami ochrany osobních údajů

Vytvořil Shoptet | Design Shoptak.cz