Bori Laková Lazura
Code: AAA1193K AAA1193KK AAA1193 AAA1203K AAA1203KK AAA1203 AAA1199K AAA1199KK AAA1199 AAA1196K AAA1196KK AAA1196 AAA1195K AAA1195KK AAA1195 AAA1194K AAA1194KK AAA1194 AAA1192K AAA1192KK AAA1192 AAA1202K AAA1202KK AAA1202 AAA1201K AAA1201KK AAA1201 AAA1197K AAA1197KK AAA1197 AAA1200K AAA120897 AAA1200 AAA1198K AAA1198 Choose variantProduct detailed description
Where it is used
Exterior and interior — on wooden structures such as fences, pergolas, garden furniture, façades, windows and doors.
What it is applied to
Wood — new and previously treated surfaces.
What its purpose is
Protects wood against external influences, highlights its natural beauty, and contains wax for better water resistance.
Bori Varnish Stain
Bori Varnish Stain is a high-quality protective coating designed for wooden surfaces, combining aesthetics with functional protection.
- 16–20 m²/lcoverage
- 1–2 coatsnumber of coats
- Satinappearance

Bori Varnish Stain
Bori Varnish Stain is a high-quality protective coating designed for wooden surfaces, combining aesthetics with functional protection. This product is ideal for use on exterior and interior wooden structures such as fences, pergolas, garden furniture, house façades, windows and doors.
Bori Varnish Stain is the perfect choice for those who want to give their wood long-lasting protection while highlighting its natural beauty.
- 30% longer-lasting protection of wood against external influences
- high-coverage coating film with a satin sheen
- contains wax, which improves the water resistance of the coating
- dimensional stability of the wood
- elasticity – the protective film does not crack or peel
- wide range of colour shades
Application
- Surface preparationThe surface should be clean, degreased, sanded, and damaged coatings removed. For new wood, the moisture content of the substrate must not exceed 15% for softwoods and 12% for hardwoods. Sand and clean the dry substrate, and remove wax, resin and grease with NITRO thinner. When renovating old coatings, clean and sand damaged coatings, and completely remove severely damaged ones.
- ApplicationStir before use and apply in 1 coat. Pick up a sufficient, even amount on a brush or roller and spread thoroughly into an even layer.
- ConditionsThe ambient and surface temperature should be between +10 and +25 °C. Relative humidity should be below 65%. Low temperature and high humidity can significantly affect drying.
- CleaningAfter finishing painting, remove as much paint as possible from the tools, then clean the used accessories and tools with thinner (ideally TESSAROL or S6006).
Key information at a glance
- 7 hrs/ 24 hrsTouch-dry time/ next coat
- With thinnerTool cleaning
- 16–20 m²/lCoverage
- Brush, rollerApplication method
- SatinAppearance
- 1–2 coatsNumber of coats
- 7 hrsTouch dry
- 10–25 °CTemperature during application
- up to 65%Air humidity
- ExteriorArea of use
How much will I need?
Coverage of 16–20 m²/l per coat. For absorbent or rough substrates, expect the higher value.
| Area | 1 coat | 2 coats |
|---|---|---|
| 10 m² | 0.5–0.7 l | 1–1.3 l |
| 25 m² | 1.3–1.6 l | 2.5–3.2 l |
| 50 m² | 2.5–3.2 l | 5–6.3 l |
When to paint
You can find the technical data sheet and safety data sheet in the related files. To ensure correct application and to obtain all the necessary product information, we recommend that you familiarise yourself with these documents. More detailed information on safety during transport, storage, handling, as well as disposal and environmental aspects, can be found in the safety data sheet.
Need some advice?
Our friendly customer support team is here for you. Email us at: podpora@surtep.cz.
Free returns
Send your order back to us free of charge.
Fast dispatch
We dispatch orders within 24 hours on working days.
Additional parameters
| Category: | Středovrstvé |
|---|---|
| EAN: | Choose variant |
Discussion
Be the first who will post an article to this item!
