Bori tenkovrstvá lazura
Code: AAA1181K AAA1181KK AAA1181 AAA1191K AAA1191KK AAA1191 AAA1187K AAA1187KK AAA1187 AAA1184K AAA1184KK AAA1184 AAA1183K AAA1183KK AAA1183 AAA1182K AAA1182KK AAA1182 AAA1180K AAA1180KK AAA1180 AAA1190K AAA1190KK AAA1190 AAA1189K AAA1189KK AAA1189 AAA1185K AAA1185KK AAA1185 AAA1188K AAA1188KK AAA1188 AAA1186K AAA1186 Choose variantProduct detailed description
Where to use it
Interior and exterior — cladding, railings, furniture.
What it is applied to
Common and tropical wood.
What its purpose is
Decorative and deep-penetrating wood protection, enhances the natural look.
Bori Thin-Layer Stain
Bori Thin-Layer Stain provides excellent decoration and protection for common and tropical wood, ideal for cladding, railings and furniture.
- 10–12 m²/lCoverage
- 1–3 coatsNumber of coats
- NaturalAppearance
Bori Thin-Layer Stain
Bori Thin-Layer Stain provides excellent decoration and protection for common and tropical wood, ideal for cladding, railings and furniture. The perfect solution for preserving the beauty and durability of wooden surfaces.
- decorative and deep-penetrating wood protection
- enhances the natural look of the wood
- enriched with natural oils
- penetrates deep into the wood
- elasticity – the protective film does not crack or peel
- easy to apply
Application
- Surface preparationThe surface should be clean, degreased, sanded, and any damaged coatings removed. New wood - Moisture content must not exceed 15% for softwoods and 12% for hardwoods. Sand and clean the dry substrate, then remove waxes, resins and grease with NITRO thinner. Renovating old coatings - Clean and sand undamaged coatings, and completely remove damaged ones.
- ApplicationStir the paint, do not dilute, and apply in 1 coat. Using a brush or roller, pick up a sufficient, even amount of the primer and spread it thoroughly into an even layer.
- ConditionsAmbient and surface temperature should be between +10 and +20 °C. Relative humidity should be below 65%. Low temperature and high humidity can significantly affect drying.
- CleaningAfter finishing painting, remove as much paint as possible from the tools, then clean the used accessories and tools with thinner (Tessarol thinner or S 6006).
Important information at a glance
- 5 hrs/ 10 hrsDrying time to dust-free/ next coat
- With thinnerTool cleaning
- 10–12 m²/lCoverage
- Brush, rollerApplication
- NaturalAppearance
- 1–3 coatsNumber of coats
- 5 hrsTouch-dry
You can find the technical data sheet and safety data sheet in the related files. To ensure proper application and to obtain all the necessary product information, we recommend reviewing these documents. More detailed information on safety during transport, storage, handling, as well as disposal and environmental aspects can be found in the safety data sheet.
Need advice?
Our friendly customer support is here for you. Email us at: podpora@surtep.cz.
Free returns
Send your order back to us free of charge.
Fast dispatch
We dispatch orders within 24 hours on working days.
Additional parameters
| Category: | Tenkovrstvé |
|---|---|
| EAN: | 3838847020311 |
Discussion
Be the first who will post an article to this item!