Eternal Antikor akrylátový
Code: 98246218107 98246215007 98246210707 98246218102 98246215002 98246210702 Choose variantProduct detailed description
Eternal Antikor Acrylic
Eternal Antikor Acrylic is a water-dilutable anti-corrosion primer made from an aqueous dispersion of acrylic copolymers modified with alkyd, special anti-corrosion pigments, fillers and additives adjusting the properties of the coating.
- 0.12–0.16 kg/m²coverage · per 1 layer
- 2 layersnumber of layers
- 5 hrsdry to the touch

Eternal Antikor Acrylic
Eternal Antikor Acrylic is a water-dilutable anti-corrosion primer made from an aqueous dispersion of acrylic copolymers modified with alkyd, special anti-corrosion pigments, fillers and additives adjusting the properties of the coating.
ETERNAL Antikor Acrylic is designed to protect metal structures against corrosion as a primer. It is also suitable for mixed structures where steel is combined with new, uncorroded galvanised sheet metal.
- Water-dilutable anti-corrosion coating: Eternal Antikor Acrylic is an anti-corrosion primer based on an aqueous dispersion of acrylic copolymers modified with alkyd, which ensures protection of metal surfaces against corrosion.
- Special composition: It contains anti-corrosion pigments, fillers and additives that optimise the properties of the coating and ensure long-term protection of the metal.
- Universal use: Suitable for steel structures as well as mixed structures where steel is combined with galvanised sheet metal, it protects metal surfaces against corrosion.
- Good adhesion: The coating provides good adhesion on well-cleaned metal substrates and protects them from the effects of moisture and air.
- Basic protective coating: It serves as a base layer which must subsequently be overcoated with a top coat (e.g. Eternal Matt Acrylic) to achieve complete protection.
Application
- Substrate preparationThe metal substrate must be thoroughly cleaned of old non-adhering coatings and corrosion products, for example using a rotary steel brush. Afterwards, the surface needs to be degreased (the use of ETERNAL degreaser is recommended). The coating should be applied immediately after cleaning the substrate.
- ApplicationEternal Antikor Acrylic is applied in two coats using a brush or roller. An interval of 5 hours at a temperature of 20 °C must be observed between the individual coats. It is not suitable for spraying with electric vibration guns.
- Top coatOnce dry, the primer must be overcoated with one to two layers of a top coating (for example Eternal Matt Acrylic) to achieve complete protection and an aesthetic result.
- ConditionsApplication should take place at a minimum substrate and ambient temperature of 10 °C. Coatings on steel substrates should be carried out in a dry environment. In cold weather, it is recommended to apply a very thin first coat so that it dries quickly.
- CleaningAfter finishing painting, remove as much of the coating material as possible from the tools, then wash them with clean water.
Key information at a glance
- 5 hrsDry to the touch
- WaterTool cleaning
- 0.12–0.16 kg/m²Coverage · per 1 layer
- Spraying/ roller/ brushApplication method
- Red-brown/greyShade
- 2 layersNumber of layers
- 10–30 °CTemperature when painting
How much will I need?
Coverage 6.3–8.3 m²/kg per one layer. For absorbent or rough substrates, allow for the upper value.
| Area | 2 layers |
|---|---|
| 10 m² | 2.4–3.2 kg |
| 25 m² | 6–8 kg |
| 50 m² | 12–16 kg |
You can find the technical data sheet and safety data sheet in the related files. To ensure correct application and obtain all the necessary information about the product, we recommend that you familiarise yourself with these documents. More detailed information on safety during transport, storage, handling, as well as disposal and environmental aspects can be found in the safety data sheet.
Need some advice?
Our friendly customer support is here for you. Write to us at the email address: podpora@surtep.cz.
Free returns
Send the order back to us free of charge.
Fast dispatch
On working days we dispatch orders within 24 hours.
Additional parameters
| Category: | Krycí barvy |
|---|---|
| EAN: | 8590892112391 |
Discussion
Be the first who will post an article to this item!
Výrobce:
| Manufacturing company : | AUSTIS a. s |
|---|---|
| Address : | K Austisu 680, 154 00 PRAHA 5 - Slivenec Česká republika |
| E-mail : | austis@austis.cz |
