Eternal Epoxy Stabil A+B 10 kg
Code: 98246641902Product detailed description
Eternal Epoxy Stabil A+B 10 kg
Eternal Epoxy Stabil A+B is a two-component coating material prepared from an aqueous dispersion of medium-molecular epoxy resin, water-dilutable hardener, pigments, fillers and special additives.
- 0.4–0.5 kg/m²coverage · priming coat + 2 coats
- 2 coatsnumber of coats
- 24 hrsdry to touch

Eternal Epoxy Stabil A+B
Eternal Epoxy Stabil A+B is a two-component coating material prepared from an aqueous dispersion of medium-molecular epoxy resin, water-dilutable hardener, pigments, fillers and special additives.
The coatings have very good abrasion resistance and withstand water, chemical de-icing agents, aliphatic and aromatic hydrocarbons, diluted acids and alkalis, and sanitising solutions well. It is intended for the surface treatment of concrete floors in cellars, garages, workshops, shops, warehouses, exhibition spaces, etc.
It is suitable for the surface treatment of interior concrete surfaces, lime-cement and cement renders, wood, fibreboard, chipboard and plasterboard. It can also be used for interior coatings of metal surfaces fitted with anti-corrosion coatings.
- Two-component epoxy enamel: Eternal Epoxy Stabil A+B is a two-component water-dilutable epoxy coating material that creates a glossy, highly resistant surface.
- High resistance: The coating has excellent resistance to abrasion, water, chemical de-icing agents, aliphatic and aromatic hydrocarbons, diluted acids, alkalis and sanitising solutions.
- Interior use: The product is intended exclusively for interior surface treatment of concrete floors in cellars, garages, workshops, warehouses, shops and exhibition spaces.
- Wide range of applications: Besides concrete floors, it is also suitable for treating lime-cement and cement renders, wooden surfaces, chipboard and plasterboard, as well as metal surfaces fitted with an anti-corrosion coating.
- Certified for specific applications: The coating provides long-term protection in demanding environments with high requirements for mechanical and chemical surface resistance.
Processing
- Substrate preparationConcrete substrates must be fully cured, dry, cohesive, clean and primed. New and smoothed concrete surfaces should be shot-blasted or sanded before application.
- Mixing the componentsComponent A (epoxy resin) is mixed with component B (hardener) in a 1:1 ratio by weight. Mixing should be slow and last 5 minutes. The mixture is then left to stand for 15 minutes and briefly re-mixed before application.
- DilutionAfter the induction time has elapsed, the mixture can be diluted with water to achieve the right consistency for the particular application technique.
- ApplicationEternal Epoxy Stabil A+B is applied to a previously prepared, primed substrate. The priming coat is applied diluted with 25% water and left to dry for 5 hours before applying the main coat. Two coats are recommended, with a 24-hour interval between coats. For maximum protection, the coating is fully cured after 7 days. Metal substrates must be fitted with a suitable anti-corrosion coating, e.g. SANAKRYL antikor EP.
- Anti-slip finish– If an anti-slip finish is required, sand with a grain size of 0.2–0.5 mm can be sprinkled into the first coat.
- ConditionsThe substrate and ambient temperature must be at least 15 °C, with a maximum relative air humidity of 80%. Ensuring sufficient ventilation during application and drying is essential to prevent coating defects.
- CleaningAfter finishing painting, remove as much of the coating material as possible from the tools, then wash them with clean water.
Key information at a glance
- 24 hrsDry to touch
- With waterTool cleaning
- 0.4–0.5 kg/m²Coverage · priming coat + 2 coats
- Spraying/ roller/ brush/ broad brushApplication
- Light greyShade
- 2 coatsNumber of coats
You can find the technical data sheet and safety data sheet in the related files. To ensure correct application and to get all the necessary information about the product, we recommend familiarising yourself with these documents. More detailed information on safety during transport, storage, handling, as well as disposal and ecology can be found in the safety data sheet.
Need advice?
Our friendly customer support is here for you. Email us at: podpora@surtep.cz.
Free returns
Send your order back to us free of charge.
Fast dispatch
We dispatch orders within 24 hours on working days.
Additional parameters
| Category: | Krycí barvy |
|---|---|
| EAN: | 8590892113299 |
Discussion
Be the first who will post an article to this item!
Výrobce:
| Manufacturing company : | AUSTIS a. s |
|---|---|
| Address : | K Austisu 680, 154 00 PRAHA 5 - Slivenec Česká republika |
| E-mail : | austis@austis.cz |
