Eternal In, Bílá
Code: 98246304000 98246301800 98246301200 98246300600 98246300300 98246300100 Choose variantProduct detailed description
Where to use it
Interior. Designed for the surface treatment of walls made of plasterboard, mineral and acrylic plasters, restoration plasters, concrete (panels and monolithic), surfaces made of…
What it is applied to
On degreased, cohesive, dry to not fully dried substrates free of loose mechanical particles. Highly absorbent substrates must be primed beforehand. Areas affected by…
What its purpose is
Surface treatment of interior walls.
Eternal In, White
ETERNAL IN is a water-dilutable, brilliant white, pleasantly scented interior dispersion paint, characterised by high opacity and very pleasant application properties.
- 0.10–0.15 kg/m²Coverage
- 2 coatsNumber of coats
- Brilliant whiteAppearance

Eternal In
ETERNAL IN is a water-dilutable, brilliant white, pleasantly scented interior dispersion paint, characterised by high opacity and very pleasant application properties.
Thanks to its high vapour permeability and dry abrasion resistance, it is intended for the surface treatment of interior walls made of plasterboard, mineral, gypsum, acrylic plasters, concrete (panels and monolithic), surfaces of fibre-cement, gypsum fibre and chipboard panels, wallpapers intended for this purpose and other absorbent substrates.
It is also suitable for application on restoration plasters.
- Opacity – High opacity.
- Vapour permeability – High vapour permeability.
- Resistance – Resistant to dry abrasion.
- Scent – Pleasantly scented.
- VOC content – 12 g/l.
Area of use
It is designed for the surface treatment of interior walls made of plasterboard, mineral, acrylic plasters, restoration plasters, concrete (panels and monolithic), surfaces of fibre-cement, gypsum fibre and chipboard panels, wallpapers intended for this purpose and other absorbent surfaces.
Application
The substrate must be degreased, cohesive, dry or not fully dried, free of loose mechanical particles. Areas affected by mould must (while wet!) be freed of mould and treated with a suitable eradication agent. Highly absorbent substrates must be primed beforehand.
Before use, mix the material thoroughly. For application with a brush, up to 20% water may be added, with a roller up to 10% water, with high-pressure airless spraying 5% water.
It is applied to the wall no sooner than 4 hours after priming, in 1-2 coats. It is applied with a brush / roller / painting brush / high-pressure spraying. The temperature of the substrate and surroundings during application must be between 5–25 °C.
Maintenance coats can be applied over base coats made with ETERNAL IN paint without the need to remove the original dispersion coat.
Consumption
0.2–0.3 kg/m²
Key information at a glance
- 0.10–0.15 kg/m²Coverage
- 2 coatsNumber of coats
- 30 minutesDry to the touch
- WaterTool cleaning
- Roller, brush, high-pressure airless sprayingApplication
- InteriorArea of use
- Brilliant whiteAppearance
- Max. 20% water for brush application, max. 10% water for roller, 5% water for…Dilution
How much will I need?
Coverage 6.7–10 m²/kg per coat. For an absorbent or rough substrate, count on the upper value.
| Area | 2 coats |
|---|---|
| 10 m² | 2–3 kg |
| 25 m² | 5–7.5 kg |
| 50 m² | 10–15 kg |
The technical data sheet and safety data sheet can be found in the related files. To ensure correct application and to obtain all the necessary product information, we recommend familiarising yourself with these documents. More information about safety during transport, storage, handling, as well as disposal and ecology can be found in the safety data sheet.
Need advice?
Our friendly customer support is here for you. Write to us via the contact form.
Free returns
Send your order back to us free of charge.
Fast dispatch
On working days, we dispatch orders within 24 hours.
Additional parameters
| Category: | Krycí barvy |
|---|---|
| EAN: | Choose variant |
Discussion
Be the first who will post an article to this item!
Výrobce:
| Manufacturing company : | AUSTIS a. s |
|---|---|
| Address : | K Austisu 680, 154 00 PRAHA 5 - Slivenec Česká republika |
| E-mail : | austis@austis.cz |
