Eternal lak na beton
Code: 98246648025 98246648007 98246648003 98246648525 98246648507 Choose variantProduct detailed description
Eternal lacquer for concrete
ETERNAL lacquer for concrete is a solvent-free, highly resistant lacquer intended for impregnation and thin-film coatings of mineral surfaces indoors and outdoors.
- 0.08–0.12 kg/m²Coverage · in two coats
- 1–2 coatsNumber of coats

Eternal lacquer for concrete
ETERNAL lacquer for concrete is a solvent-free, highly resistant lacquer intended for impregnation and thin-film coatings of mineral surfaces indoors and outdoors. After application, it forms a glossy, hard, transparent film with anti-slip properties and excellent chemical and thermal resistance.
It is suitable for the surface treatment of concrete substrates, marble, concrete and stone tiles, cladding made of concrete, natural stone or terrazzo. Ideal for areas exposed to heavy loads, such as warehouses, workshops, exhibition spaces or shops.
- Deep penetration: The lacquer penetrates deep into the substrate, ensuring its long-term protection.
- High resistance: It withstands chemicals, heat and mechanical wear, making it ideal for heavily loaded surfaces.
- Anti-slip surface: It creates a surface with anti-slip properties, increasing safety when walking.
- Glossy appearance: Once dry, it provides an exclusive glossy surface that makes maintenance easier.
- Eco-friendly: Solvent-free, environmentally friendly.
Processing
- Surface preparationThe substrate must be dry, solid, cohesive, degreased and cleaned of loose mechanical particles and old coatings. The lacquer can also be used on not fully matured concrete (curing of approx. 7 days).
- ApplicationMix the lacquer thoroughly before use. Apply in two coats at the supplied consistency, undiluted, using a brush or a short-pile roller (e.g. Velour). After the first coat dries, the film may appear non-uniform, which will even out after the second coat dries. Apply the second coat no later than 24 hours after the first. Ensure sufficient ventilation during application and for at least 2 hours after finishing.
- ConditionsThe optimal application temperature is between 15–25 °C. Avoid applying in high humidity or direct sunlight.
- CleaningClean tools immediately after use with technical petrol or other suitable solvents.
Key information at a glance
- 24 hrsDry to the touch
- With waterTool cleaning
- 0.08–0.12 kg/m²Coverage · in two coats
- Roller/brush/sprayingApplication
- Several shades according to colour chartsShade
- 1–2 coatsNumber of coats
- 15–25 °CPainting temperature
- OutdoorArea of use
How much will I need?
Coverage 16.7–25 m²/kg per coat (calculated from 0.08–0.12 kg/m² in two coats). For absorbent or rough substrates, allow for the upper value.
| Area | 1 coat | 2 coats |
|---|---|---|
| 10 m² | 0.4–0.6 kg | 0.8–1.2 kg |
| 25 m² | 1–1.5 kg | 2–3 kg |
| 50 m² | 2–3 kg | 4–6 kg |
When to paint
You can find the technical data sheet and safety data sheet in the related files. To ensure correct application and to obtain all the necessary product information, we recommend that you familiarise yourself with these documents. For more information on safety during transport, storage, handling, as well as disposal and environmental matters, please see the safety data sheet.
Need advice?
Our friendly customer support team is here for you. Email us at: podpora@surtep.cz.
Free returns
Send your order back to us free of charge.
Fast dispatch
We dispatch orders within 24 hours on working days.
Additional parameters
| Category: | Oleje |
|---|---|
| EAN: | 8590892121669 |
Discussion
Be the first who will post an article to this item!
Výrobce:
| Manufacturing company : | AUSTIS a. s |
|---|---|
| Address : | K Austisu 680, 154 00 PRAHA 5 - Slivenec Česká republika |
| E-mail : | austis@austis.cz |
