ETERNAL na střechy
Code: 98246451001 98246451002 98246451006 98246451007 98246450507 98246451009 98246451023 98246451004 98246450504 Choose variantProduct detailed description
ETERNAL for Roofs
It is a water-dilutable, permanently elastic coating for protective coatings and minor repairs of fibre-cement, concrete and asphalt roofing, significantly extending their service life.
- 0.50–0.55 kg/m²coverage · for 2 coats
- 1–2 coatsnumber of coats
- 12 hrsdry to the touch

Eternal for Roofs
It is a water-dilutable, permanently elastic coating for protective coatings and minor repairs of fibre-cement, concrete and asphalt roofing, significantly extending their service life. It is intended for the maintenance of fibre-cement roofing, concrete and unglazed fired roof tiles, and wooden shingles on roofs with a pitch of at least 10°.
It is also suitable for coating asphalt roofing. After drying, it forms a watertight coating film with high adhesion to the substrate, long-term durability, UV resistance, and permanent elasticity even at low temperatures. With Eternal for Roofs coating, small cracks in the substrate can be covered and sealed.
- Water-dilutable coating: Eternal for Roofs is a special coating designed for protective coatings and minor repairs of fibre-cement, concrete and asphalt roofing.
- Permanently elastic: After drying, it forms a permanently elastic coating film that is resistant to low temperatures and UV radiation, providing long-term protection for the roof.
- Watertightness: The coating forms a watertight film with high adhesion to the substrate, covering and sealing small cracks.
- Extending the roof's lifespan: When applied correctly, it significantly extends the lifespan of the roofing.
- Versatile use: Suitable for fibre-cement, concrete, asphalt roofing, unglazed fired tiles, and wooden shingles on roofs with a pitch of at least 10°.
Application
- Substrate preparationThe substrate must be dry, thoroughly cleaned, and degreased (use of Eternal degreaser is recommended).
- ApplicationAfter thorough mixing, Eternal for Roofs is applied with a brush or roller in 1–2 coats. The second coat can be applied no earlier than after 12 hours. The product must not be diluted.
- ConditionsThe optimal application temperature is between 8–30 °C.
- CleaningAfter finishing painting, remove as much coating material as possible from the tools, then wash them with clean water.
Key information at a glance
- 12 hrsDry to the touch
- With waterTool cleaning
- 0.50–0.55 kg/m²Coverage · for 2 coats
- Roller/brush/sprayingApplication
- More shades according to sample chartsShade
- 1–2 coatsNumber of coats
How much will I need?
Coverage of 3.6–4 m²/kg per coat (calculated from the figure of 0.50-0.55 kg/m2 for 2 coats). For absorbent or rough substrates, count on the upper value.
| Area | 1 coat | 2 coats |
|---|---|---|
| 10 m² | 2.5–2.8 kg | 5–5.5 kg |
| 25 m² | 6.3–6.9 kg | 12.5–13.8 kg |
| 50 m² | 12.5–13.8 kg | 25–27.5 kg |
You can find the technical data sheet and safety data sheet in the related files. To ensure correct application and obtain all the necessary information about the product, we recommend familiarising yourself with these documents. More detailed information on safety during transport, storage, handling, as well as disposal and environmental matters, can be found in the safety data sheet.
Need some advice?
Our friendly customer support is here for you. Email us at: podpora@surtep.cz.
Free returns
Send your order back to us free of charge.
Fast dispatch
On working days, we dispatch orders within 24 hours.
Additional parameters
| Category: | Krycí barvy |
|---|---|
| EAN: | Choose variant |
Discussion
Be the first who will post an article to this item!
Výrobce:
| Manufacturing company : | AUSTIS a. s |
|---|---|
| Address : | K Austisu 680, 154 00 PRAHA 5 - Slivenec Česká republika |
| E-mail : | austis@austis.cz |
