ETERNAL na střechy
Code: 98246451001 98246451002 98246451006 98246451007 98246450507 98246451009 98246451023 98246451004 98246450504 Choose variantProduct detailed description
ETERNAL for roofs
This is a water-dilutable coating material, permanently flexible, for protective coatings and minor repairs of fibre-cement, concrete and asphalt roofing, significantly extending their service life.
- 0.50–0.55 kg/m²Coverage · for 2 coats
- 1–2 coatsNumber of coats

Eternal for roofs
This is a water-dilutable coating material, permanently flexible, for protective coatings and minor repairs of fibre-cement, concrete and asphalt roofing, significantly extending their service life. It is intended for the maintenance of fibre-cement roofing, concrete and unglazed clay roof tiles and wooden shingles on roofs with a slope of at least 10°.
It is also suitable for coating asphalt roofing. Once dry, it forms a watertight coating film with high adhesion to the substrate, long-term durability, UV resistance, and permanent flexibility even at low temperatures. With the Eternal for roofs coating material, small cracks in the substrate can be covered and sealed.
- Water-dilutable coating material: Eternal for roofs is a special coating material designed for protective coatings and minor repairs of fibre-cement, concrete and asphalt roofing.
- Permanently flexible: Once dry, it forms a permanently flexible coating film that is resistant to low temperatures and UV radiation, providing long-term protection for the roof.
- Watertightness: The coating forms a watertight film with high adhesion to the substrate, which covers and seals small cracks.
- Extending the roof's service life: When applied correctly, it significantly extends the service life of the roofing.
- Versatile use: Suitable for fibre-cement, concrete, asphalt roofing, unglazed clay tiles and wooden shingles on roofs with a slope of at least 10°.
Application
- Substrate preparationThe substrate must be dry, thoroughly cleaned and degreased (use of the Eternal degreaser is recommended).
- ApplicationAfter thorough mixing, Eternal for roofs is applied with a brush or roller in 1–2 coats. The second coat can be applied no earlier than after 12 hours. The product must not be diluted.
- ConditionsThe optimal application temperature is between 8–30 °C.
- CleaningAfter finishing painting, remove as much coating material as possible from the tools, then wash them with clean water.
Key information at a glance
- 12 hrsTouch dry
- With waterTool cleaning
- 0.50–0.55 kg/m²Coverage · for 2 coats
- Roller/ brush/sprayingApplication method
- Multiple shades according to colour chartsShade
- 1–2 coatsNumber of coats
- Roofs in exterior (eternit, concrete)Area of use
- 8–30 °CPainting temperature
How much will I need?
Coverage 3.6–4 m²/kg per coat (calculated from the value 0.50-0.55 kg/m2 for 2 coats). For absorbent or rough substrates, count on the higher value.
| Area | 1 coat | 2 coats |
|---|---|---|
| 10 m² | 2.5–2.8 kg | 5–5.5 kg |
| 25 m² | 6.3–6.9 kg | 12.5–13.8 kg |
| 50 m² | 12.5–13.8 kg | 25–27.5 kg |
When to paint
You can find the technical data sheet and safety data sheet in the related files. To ensure correct application and to obtain all the necessary information about the product, we recommend that you familiarise yourself with these documents. More detailed information on safety during transport, storage, handling, as well as disposal and environmental aspects can be found in the safety data sheet.
Need advice?
Our friendly customer support is here for you. Write to us at the email: podpora@surtep.cz.
Free returns
Send the order back to us free of charge.
Fast dispatch
On working days, we dispatch orders within 24 hours.
Additional parameters
| Category: | Krycí barvy |
|---|---|
| EAN: | 8590892121386 |
Discussion
Be the first who will post an article to this item!
Výrobce:
| Manufacturing company : | AUSTIS a. s |
|---|---|
| Address : | K Austisu 680, 154 00 PRAHA 5 - Slivenec Česká republika |
| E-mail : | austis@austis.cz |
