Eternal Stabil
Code: 98246619110 98246619010 98246618010 98246617010 98246619160 98246619060 98246619120 98246619020 98246618020 98246617020 98246619140 98246619040 Choose variantProduct detailed description
Eternal Stabil
Eternal Stabil is a water-dilutable coating material prepared on the basis of a special aqueous dispersion of an acrylate copolymer, suitable pigments, fillers and additives.
- 0.40–0.50 kg/m²coverage
- 2 coatsnumber of coats
- Matteappearance

Eternal Stabil
Eternal Stabil is a water-dilutable coating material prepared on the basis of a special aqueous dispersion of an acrylate copolymer, suitable pigments, fillers and additives.
The finished coating has very good abrasion resistance, good adhesion to concrete surfaces, water-insulating properties and very good weather resistance. It is suitable for the surface treatment of concrete surfaces, concrete tiles, concrete paving blocks, concrete floors in cellars, staircases, storage areas, exhibition spaces, etc. This coating material can also be used to treat the concrete surface of balconies, terraces, steps, pavements and similar.
It is certified for food contact. It reliably withstands normal loads, but is not suitable for surface treatment of floors subjected to load shifting. The finished treatment has a matte appearance and an anti-slip finish. ETERNAL stabil cannot be used for coatings permanently located under water.
It is not recommended to use it as a coating on highly smoothed surfaces without prior roughening. It also features very good adhesion to asphalt and asphalt concrete.
- Water-dilutable paint: Eternal Stabil is a water-based coating material, suitable for surface treatment of concrete surfaces and paving with water-insulating properties.
- Resistance and adhesion: The finished coating provides very good abrasion resistance and high adhesion to concrete substrates.
- Water-insulating properties: The coating has water-insulating effects that help protect concrete from moisture and weather influences.
- Versatile use: Suitable for treating concrete surfaces such as floors, paving, terraces, balconies, pavements, steps and more.
- Food contact certification: Eternal Stabil is certified for safe use on surfaces that may come into contact with food.
- Anti-slip and matte surface: The coating provides a matte appearance and an anti-slip finish, which increases the safety of surfaces.
- Not suitable for heavy loads: It is not intended for surfaces subjected to heavy loads or for permanent placement under water.
- Adhesion to asphalt: It also has very good adhesion to asphalt and asphalt concrete surfaces.
Processing
- Surface preparationThe substrate must be dry, cohesive, clean, repaired and matured. New or smoothed concrete floors must be sandblasted or ground and primed with undiluted primer before application.
- ApplicationEternal Stabil is not diluted before use and is ready for direct application. Eternal Stabil is applied in two coats with an interval of 4–24 hours between individual coats, depending on weather conditions. For more heavily stressed surfaces, the application of three coats is recommended.
- ConditionsThe coating should be applied at a temperature of 10–30 °C. Outdoors, the coating must not be applied in intense direct sunlight.
- CleaningAfter finishing painting, remove as much coating material as possible from the tools, then wash them with clean water.
- Surface loadingThe coated surface can be gradually loaded after 3 days, full load is possible 7 days after application of the last coat.
Key information at a glance
- 24 hrsDry to touch
- WaterTool cleaning
- 0.40–0.50 kg/m²Coverage
- Spraying/ roller/ brush/ brushApplication method
- MatteAppearance
- 2 coatsNumber of coats
- ExteriorArea of use
- 10–30 °CPainting temperature
How much will I need?
Coverage 2–2.5 m²/kg per coat. For absorbent or rough surfaces, count on the upper value.
| Area | 2 coats |
|---|---|
| 10 m² | 8–10 kg |
| 25 m² | 20–25 kg |
| 50 m² | 40–50 kg |
When to paint
You can find the technical data sheet and safety data sheet in the related files. To ensure correct application and to obtain all the necessary information about the product, we recommend that you familiarise yourself with these documents. More detailed information on safety during transport, storage, handling, as well as disposal and ecology can be found in the safety data sheet.
Need advice?
Our friendly customer support is here for you. Write to us at the email: podpora@surtep.cz.
Free returns
Send the order back to us free of charge.
Fast dispatch
We dispatch orders within 24 hours on working days.
Additional parameters
| Category: | Krycí barvy |
|---|---|
| EAN: | 8590892122154 |
Discussion
Be the first who will post an article to this item!
Výrobce:
| Manufacturing company : | AUSTIS a. s |
|---|---|
| Address : | K Austisu 680, 154 00 PRAHA 5 - Slivenec Česká republika |
| E-mail : | austis@austis.cz |
