Xyladecor Natur Pro
Code: AAAPC11070640 AAAPC11070632 AAAPC11070646 AAAPC11070638 AAAPC11070642 AAAPC11070634 AAAPC11070643 AAAPC11070635 AAAPC11070644 AAAPC11070636 AAAPC11070645 AAAPC11070637 AAAPC11070647 AAAPC11070639 AAAPC11070641 AAAPC11070633 Choose variantProduct detailed description
Where to use it
Interior and exterior — house cladding, cottages, gazebos, pergolas, fences, balconies, windows, doors.
What it is applied to
Wooden surfaces.
What its purpose is
Protects against UV radiation, frost and adverse weather, highlights the wood grain, resistant to cleaning agents.
Xyladecor Natur Pro
Xyladecor NATUR PRO is a premium medium-coat oil-based water-borne stain for interior and exterior use.
- Up to 14 m²/lCoverage · per coat
- Satin mattFinish

Xyladecor Natur PRO
Xyladecor NATUR PRO is a premium medium-coat oil-based water-borne stain for interior and exterior use. It forms a strong, elegantly semi-matt satin film on the wood surface, which protects against UV radiation and adverse weather. Fast-drying. The coating is resistant to common household cleaning agents.
The product's creamy consistency makes application easier, spreads better and penetrates deeper into the wood. It increases the adhesion of the next coat. It highlights the wood grain and has no odour.
It is intended for all wooden surfaces, such as house cladding, cottages, gazebos, pergolas, fences, balconies, windows, doors and other wooden surfaces in exterior and interior settings.
- Up to 6 years of protection
- Fast-drying
- Protects against frost, UV radiation and adverse weather
- Highly elastic film
- Natural oils from renewable sources
- Intended for both indoor and outdoor use
- Water resistance – increased water repellency
Application
- Surface preparationFor exterior coatings, it is recommended to pre-treat the substrate with Xyladecor Xylamon HP fungicidal impregnation. Apply Xyladecor Natur PRO to a dry and clean surface. Remove any old coatings. Mix the contents thoroughly before use. Do not dilute.
- ApplicationApply Xyladecor Natur PRO with a brush in the direction of the grain. Carry out the coating in stable, dry weather. Apply 1–2 coats indoors. For long-term protection outdoors, apply 2–3 coats. The interval between individual coats is 4-8 hours. Dry to the touch after approx. 1 hour, fully dry after 12 hours. Lightly sand the coating before applying the next layer. Apply Xyladecor Natur PRO in stable, dry weather at temperatures of 5–30 °C and relative humidity below 85 %.
- ConditionsAmbient temperature and temperature of +20 °C and relative humidity of 50 %. Low temperature and high humidity can significantly affect drying.
- CleaningAfter finishing painting, remove as much paint as possible from the tools, then wash them with clean water.
Key information at a glance
- 1 hr/ 4 hr/ 12 hrDrying time touch/ next coat/ full cure
- With waterTool cleaning
- Up to 14 m²/lCoverage · per coat
- BrushApplication method
- Satin mattFinish
- 1–2 coats indoor 2–3 coats outdoorNumber of coats
- approx. 1 hrDry to the touch
- 5–30 °CApplication temperature
- up to 85 %Air humidity
- ExteriorArea of use
How much will I need?
Coverage of 14 m²/l per coat. For absorbent or rough substrates, allow for the higher value.
| Area | 1 coat | 2 coats | 3 coats |
|---|---|---|---|
| 10 m² | 0.7–0.8 l | 1.4–1.5 l | 2.1–2.2 l |
| 25 m² | 1.8 l | 3.6 l | 5.4 l |
| 50 m² | 3.6 l | 7.1–7.2 l | 10.7–10.8 l |
When to paint
The technical data sheet and safety data sheet can be found in the related files. To ensure correct application and to get all the necessary product information, we recommend that you familiarise yourself with these documents. More information on safety during transport, storage, handling, as well as disposal and environmental aspects can be found in the safety data sheet.
Need some advice?
Our friendly customer support is here for you. Email us at: podpora@surtep.cz.
Free returns
Send your order back to us free of charge.
Fast dispatch
We dispatch orders within 24 hours on working days.
Additional parameters
| Category: | Lazury |
|---|---|
| EAN: | 8590627984743 |
Discussion
Be the first who will post an article to this item!
| Manufacturing company : | AkzoNobel Coatings CZ, a.s. |
|---|---|
| Address : | Vyskočilova 1481/4 Praha 4 – Michle 140 00 Česká republika |
| E-mail : | infolinka@akzonobel.com |
