Xyladecor Podlahový lak na vodní bázi
Code: AAA51K AAA51KK AAA51 AAA52K AAA52KK AAA52 Choose variantProduct detailed description
Where to use it
Interior — for parquet flooring, panelling, doors, railings, furniture and other wooden surfaces.
What to apply it to
Wood — clean, dry, degreased and sanded surfaces.
What its purpose is
Protects and decorates wooden floors, forming a glossy or semi-matt surface that is resistant to abrasion.
Xyladecor Water-Based Floor Varnish
Xyladecor Water-Based Floor Varnish is recommended for interior use on a wide variety of wooden surfaces, such as parquet flooring, panelling, doors, railings or furniture and others.
- 10–12 m²/lcoverage · per coat
- 2–3 coatsnumber of coats
- 2 hrsdry to the touch

Xyladecor Water-Based Floor Varnish
Xyladecor Water-Based Floor Varnish is recommended for interior use on a wide variety of wooden surfaces, such as parquet flooring, panelling, doors, railings or furniture and others. It forms a silky semi-matt or glossy surface that is resistant to abrasion.
It does not change the colour of the wood, so there is no need to use a special base varnish beforehand. We do not recommend using the varnish on heated surfaces or on surfaces impregnated with oil or wax.
- Final appearance: Glossy or semi-matt
- Intended use: For interior use
- Other: Abrasion resistant
- Mechanical resistance
- Excellent appearance
- Odourless
Surface requirements
Surfaces to be varnished must be clean, dry, degreased and sanded. Remove any remains of the original paint, flaking varnish or residues of wood stain. Fill any damaged surface with wood filler and sand it down. The product is ready for direct use. Stir thoroughly before application.
- A brush with fine natural bristles or a roller
- With water, or with soapy water if necessary. Before cleaning, remove as much varnish as possible from the brush and roller.
Application
For varnishing, use a brush with soft natural bristles or a velour paint roller. As a base coat on new surfaces, apply one layer of floor varnish diluted with 10% water. Then apply 2–3 thin coats of undiluted varnish (each after at least 2 hours). Depending on the quality of the surface, individual coats can be sanded down with fine-grit sandpaper. Do not use the varnish at air temperatures below 5 °C or in high humidity. The surface reaches full resistance after 2–3 days.
Number of coats
2-3 coats
10-12 m²/l per coat
You can find the technical and safety data sheet in the related files.
- The coating is dry to the touch after 2 hours.
- The next coat can be applied after 2 hours.
- The coating is fully dry after 4 hours.
- Temperature +20 °C and relative humidity 50%
Key information at a glance
- 10–12 m²/lCoverage · per coat
- 2–3 coatsNumber of coats
- 2 hrsDry to the touch
How much will I need?
Coverage of 10–12 m²/l per coat. For absorbent or rough surfaces, use the upper value.
| Area | 2 coats | 3 coats |
|---|---|---|
| 10 m² | 1.7–2 l | 2.5–3 l |
| 25 m² | 4.2–5 l | 6.3–7.5 l |
| 50 m² | 8.3–10 l | 12.5–15 l |
You can find the technical data sheet in the related files. To ensure correct application and get all the necessary information about the product, we recommend that you familiarise yourself with these documents.
Need some advice?
Our friendly customer support team is here for you. Email us at: podpora@surtep.cz.
Free returns
Send the order back to us free of charge.
Fast dispatch
We dispatch orders within 24 hours on working days.
Additional parameters
| Category: | Podlahové laky |
|---|---|
| EAN: | 4000729075613 |
Discussion
Be the first who will post an article to this item!
| Manufacturing company : | AkzoNobel Coatings CZ, a.s. |
|---|---|
| Address : | Vyskočilova 1481/4 Praha 4 – Michle 140 00 Česká republika |
| E-mail : | infolinka@akzonobel.com |
