Xyladecor Podlahový lak polyuretanový
Code: AAA928K AAA928KK AAA928 AAA927K AAA927KK AAA927 Choose variantProduct detailed description
Where to use it
Interior — parquet, panelling, doors, railings, furniture.
What to apply it to
Wood — dry, clean, free of wax, resins, oils and dirt.
What is its purpose
Forms a glossy or semi-matt surface resistant to abrasion.
Xyladecor Polyurethane Floor Varnish
Xyladecor Floor Varnish is a colourless, solvent-based single-component varnish for interior use on a variety of wooden surfaces such as parquet, panelling, doors, railings or furniture.
- 10–12 m²/lcoverage · per coat
- 2–3 coatsnumber of coats
- 3 hrstouch dry
Xyladecor Polyurethane Floor Varnish
Xyladecor Floor Varnish is a colourless, solvent-based single-component varnish for interior use on a variety of wooden surfaces such as parquet, panelling, doors, railings or furniture. It forms a silky semi-matt or glossy surface resistant to abrasion.
We do not recommend using the varnish on heated surfaces or on surfaces impregnated with oil or wax.
- Final appearance: Glossy or semi-matt
- Intended use: For indoor use
- Other: Abrasion resistant
- For wooden floors, wooden furniture, interior doors, etc.
Surface requirements
Apply the product to dry, clean wood. The surface to be varnished must be dry and free of wax, resins, oils and other dirt. Fill any damaged areas with wood filler and sand down. The product is ready to use. Mix the contents thoroughly before use. Do not dilute. Remove any skin that may have formed.
- Brush with fine natural bristles or roller
- With white spirit or thinner S 6006. Before cleaning, remove as much varnish as possible from the brush and roller.
Application
Apply with a brush with fine natural bristles or a velour lacquering roller in 2–3 thin coats (each after 24 hours). Apply the coat in thin layers following the wood grain. Depending on the quality of the surface, each coat can be sanded with fine-grit sandpaper. Do not use the varnish at air temperatures below 5 °C or in high humidity (above 80%). The surface reaches full resistance after 7 days.
Number of coats
2-3 coats
10-12 m²/l per coat
The technical and safety data sheet can be found in the related files.
- The coat is touch dry after 3 hours.
- The next coat can be applied after 24 hours. The coat is fully dry after 24 hours.
- Temperature +20 °C and relative humidity 50%
Key information at a glance
- 10–12 m²/lCoverage · per coat
- 2–3 coatsNumber of coats
- 3 hrsTouch dry
The safety data sheet can be found in the related files. To ensure correct application and obtain all the necessary product information, we recommend familiarising yourself with these documents. More detailed information on safety during transport, storage, handling, as well as disposal and environmental matters can be found in the safety data sheet.
Need advice?
Our friendly customer support is here for you. Email us at: podpora@surtep.cz.
Free returns
Send your order back to us free of charge.
Fast dispatch
We dispatch orders within 24 hours on working days.
Additional parameters
| Category: | Podlahové laky |
|---|---|
| EAN: | 4000729075521 |
Discussion
Be the first who will post an article to this item!
| Manufacturing company : | AkzoNobel Coatings CZ, a.s. |
|---|---|
| Address : | Vyskočilova 1481/4 Praha 4 – Michle 140 00 Česká republika |
| E-mail : | infolinka@akzonobel.com |