Xyladecor UV+
Code: AAA929K AAA929KK AAA929 Choose variantProduct detailed description
Where to use it
Interior and exterior — wooden cladding, railings, fences, pergolas, garden furniture, conservatories.
What to apply it to
Wood — all wooden surfaces, including those in bathrooms with higher humidity.
What its purpose is
Protects against UV radiation and weather effects, enhances the wood grain, does not crack or peel.
Xyladecor UV+
Xyladecor UV+ is a colourless, solvent-based glaze with two types of UV absorbers that provide effective, long-term protection against weather conditions and UV radiation.
- 15–20 m²/lcoverage · per coat
- Semi-mattappearance
- 5 hrsdry to touch
Xyladecor UV+
Xyladecor UV+ is a colourless, solvent-based glaze with two types of UV absorbers that provide effective, long-term protection against weather conditions and UV radiation. It creates a satin finish that enhances the wood grain without restricting the wood's breathability. The coating does not crack or peel.
It is suitable for interior and exterior use on all wooden surfaces, such as wall cladding, railings, fences, pergolas, garden furniture and more. The glaze is also suitable for wooden surfaces in bathrooms exposed to higher humidity. Xyladecor UV+ is recommended for furniture in conservatories.
- For indoor and outdoor use
- Resistance to water
- Protects against UV radiation
- The coating does not crack or peel
- 6 years of protection
- Complete protection
- Deep penetration
- Enhances the wood grain
- Forms an elastic film
Application
- Surface preparationSurfaces to be coated must be clean, dry, degreased and sanded. Remove any remnants of the original paint, peeling varnish or residues of stains. Stir the contents thoroughly before use. Do not dilute. Remove any skin that may have formed.
- ApplicationStir the contents thoroughly before use. Do not dilute. Apply with a brush with fine natural bristles in 2-3 thin coats along the wood grain (always after 24 hours). Depending on the quality of the substrate, individual coats can be sanded with fine-grit sandpaper. For previously untreated wood outdoors, we recommend pre-treating it with Xyladecor Xylamon HP fungicidal impregnation for increased protection against blue stain and rot.
- ConditionsThe ambient and surface temperature should be +20 °C. Relative humidity should be below 65%. Low temperature and high humidity can significantly affect drying.
- CleaningAfter finishing painting, remove as much paint as possible from the tools, then clean with thinner S 6006 or another common thinner.
Key information at a glance
- 5 hrs/ 24 hrsDrying time touch/ next coat
- With thinnerTool cleaning
- 15–20 m²/lCoverage · per coat
- BrushApplication
- Semi-mattAppearance
- 2–3 coats exterior 1–2 coats interiorNumber of coats
- 5 hrsDry to touch
The technical data sheet and safety data sheet can be found in the related files. To ensure correct application and obtain all the necessary product information, we recommend familiarising yourself with these documents. For more information on safety during transport, storage, handling, as well as disposal and environmental aspects, please see the safety data sheet.
Need advice?
Our friendly customer support team is here for you. Email us at: podpora@surtep.cz.
Free returns
Send your order back to us free of charge.
Fast dispatch
We dispatch orders within 24 hours on working days.
Additional parameters
| Category: | Lazury |
|---|---|
| EAN: | 5903525790225 |
Discussion
Be the first who will post an article to this item!
| Manufacturing company : | AkzoNobel Coatings CZ, a.s. |
|---|---|
| Address : | Vyskočilova 1481/4 Praha 4 – Michle 140 00 Česká republika |
| E-mail : | infolinka@akzonobel.com |