Xyladecor UV+

Code: AAA929K AAA929KK AAA929 Choose variant
Not rated
€74,96 / pcs €116,79 / pcs €25,34 / pcs from €25,34 / pcs €61,95 excl. VAT €96,52 excl. VAT €20,94 excl. VAT from €20,94 excl. VAT Measure price:
Skladem (2 pcs) Skladem (3 pcs) Skladem (2 pcs) Choose variant
Chosen variant is not available. Reset selected parameters.
Delivery to:
20.11.2026 20.11.2026 20.11.2026 Choose variant
Delivery options

Xyladecor UV+ is a colourless, solvent-based glaze with two types of UV absorbers (HALLS), which provide effective, long-term protection against weather conditions and UV radiation. It creates a satin finish that enhances the wood grain without restricting the wood's breathability. The coating does not crack or peel. It is suitable for interior and exterior use on all wooden surfaces.

Detailed information

Product detailed description

  • Where it is used

    Interior and exterior — wooden cladding, railings, fences, pergolas, garden furniture, conservatories.

  • What it is applied to

    Wood — all wooden surfaces, including those in bathrooms with higher humidity.

  • What its purpose is

    Protects against UV radiation and weather effects, highlights the wood structure, does not crack or peel.

Xyladecor UV+

Xyladecor UV+ is a colourless solvent-based glaze with two types of UV absorbers that effectively and long-lastingly protect against bad weather and UV radiation.

  • 15–20 m²/lCoverage · in one coat
  • Semi-matteAppearance
  • 5 hrsTouch dry
Xyladecor UV+

Xyladecor UV+

Xyladecor UV+ is a colourless solvent-based glaze with two types of UV absorbers that effectively and long-lastingly protect against bad weather and UV radiation. It creates a satin surface that highlights the wood structure and does not restrict its breathability. The coating does not crack or peel.

It is suitable for interior and exterior use on all wooden surfaces, such as wooden wall cladding, railings, fences, pergolas, garden furniture and others. The glaze is also suitable for wooden surfaces in bathrooms that are exposed to increased humidity. Xyladecor UV+ is recommended for furniture in conservatories.

  • For interior and exterior use
  • Resistance to water exposure
  • Protects against UV radiation
  • The coating does not crack or peel
  • 6 years of protection
  • Complete protection
  • Deep penetration
  • Highlights the wood structure
  • Creates an elastic film

Application

  1. Surface preparationSurfaces to be coated must be clean, dry, degreased and sanded. Remove any remnants of the original paint, flaking varnish or stain residues. Mix the contents thoroughly before use. Do not dilute. Remove any skin that may have formed.
  2. ApplicationMix the contents thoroughly before use. Do not dilute. Apply with a brush with fine natural bristles in 2-3 thin coats along the wood grain (always after 24 hours). Depending on the quality of the substrate, individual coats can be lightly sanded with fine-grit sandpaper. For previously untreated wood outdoors, we recommend first treating it with the fungicidal impregnation Xyladecor Xylamon HP for increased protection against blue stain and rot.
  3. ConditionsThe ambient and surface temperature should be +20 °C. Relative humidity should be below 65%. Low temperature and high humidity can significantly affect drying.
  4. CleaningAfter finishing painting, remove as much paint as possible from the tools, then clean with thinner S 6006 or another common thinner.

Important information at a glance

  • 5 hrs/ 24 hrsDrying time touch/ next coat
  • With thinnerTool cleaning
  • 15–20 m²/lCoverage · in one coat
  • BrushApplication method
  • Semi-matteAppearance
  • 2–3 coats exterior 1–2 coats interiorNumber of coats
  • 5 hrsTouch dry

How much will I need?

Coverage 15–20 m²/l per coat. For absorbent or rough substrates, count on the upper value.

Area1 coat2 coats3 coats
10 m²0.5–0.7 l1–1.4 l1.5–2 l
25 m²1.3–1.7 l2.5–3.4 l3.8–5 l
50 m²2.5–3.4 l5–6.7 l7.5–10 l

You can find the technical data sheet and safety data sheet in the related files. To ensure correct application and to obtain all the necessary information about the product, we recommend familiarising yourself with these documents. More information on safety during transport, storage, handling, as well as disposal and ecology can be found in the safety data sheet.

  • Need advice?

    Our friendly customer support is here for you. Write to us at the email: podpora@surtep.cz.

  • Free returns

    Send the order back to us free of charge.

  • Fast dispatch

    On working days we dispatch orders within 24 hours.

Additional parameters

Category: Lazury
EAN: 5903525790355

Discussion

Be the first who will post an article to this item!

Do not fill out this field

Security check

Vložením komentáře souhlasíte s podmínkami ochrany osobních údajů

Manufacturing company : AkzoNobel Coatings CZ, a.s.
Address : Vyskočilova 1481/4 Praha 4 – Michle 140 00 Česká republika
E-mail : infolinka@akzonobel.com
Vytvořil Shoptet | Design Shoptak.cz